service & spare parts   photo gallery  contact us 
 
  Winches & Sheave Blocks    Spring Balancers
 
PWB Anchor Winches & Sheave Blocks
 
Standard Features
Benefits
Comprehensive range of hand and electric powered winches
Wide range suits most applications
Wide selection of quality brands and PWB Anchor approved designs
Reliability
Products sourced from PWB Anchor approved suppliers
Expert advice for specific winch selection
Meets PWB Anchor’s ISO 9001 Quality Approval system requirements
Flexible, easy to use
Compliance with appropriate Australian Standards
Safety and reliability
Backed by superior PWB Anchor support and warranty
Long product life
       
       
PWB Anchor Tugger Wire Rope Winch

In addition to lifting and hauling loads, the PWB Anchor Tugger Wire Rope Winch is ideally suited to off-road vehicle recovery. Able to be used at any angle, and unrestricted by rope length, this versatile winch features a spare set of safety pins and enables the wire rope to be fed through 2 sets of wear resistant interlocking jaws by a single operating lever.

Features
Light weight corrosion free aluminium body
Wear resistant alloy steel jaws
Safety pins to prevent overloading
UT13 & UT16 models fitted with carry handle
Rope reeler allows convenient storage of wire rope when not in use
All winches fully tested

Model
UT08
UT16
UT32
Part No
48612
48613
48614
Lifting Capacity
800kg
1.6t
3.2t
Hauling Capacity (tonnes)
1.25
2.5
5.0
Operating Effort (at rated load) (kg)
29
42
45
Operating Speed (mm/stroke)
>52
>52
>52
Handle Length (mm)
740
1120
1120
Rope Length (m)
20
20
10
Rope Diameter (mm)
8.3
11
16
Rope Safety Factor
5:1
5:1
5:1
Net Weight (kg)
6
11
22


PWB Anchor's Off-Road Blocks

Purpose designed for off-road vehicle recovery, PWB Anchor's Off-Road Blocks are ideally suited for use with hand and power operated winches with rope diameters of up to 11 mm. Easy operation is assured by large diameter fixing hole for direct fitment over towball, and sheave fitted with bronze bush and greased nipple.

Part No
Sheave Dia
Max Load
Wire Dia
Finish
 
(mm)
(tonnes)
(mm)
 
44616
125
8
11
plated


Dutton-Lainson Winches

The PWB Anchor range of world renowned Dutton-Lainson Winches incorporate the latest and most innovative design features. Used in a wide range of industrial and recreational applications, they also provide the safest, most reliable and effective means of pulling, lifting, lowering, or hauling marine craft and on and off-road vehicles.

DL Series Trailer (Pulling) Winches

D-L pulling winches are ideally suited to boat trailer and other horizontal pulling applications requiring free-wheeling ratchet features.

Features
Laminated high carbon steel gears for longer life
Arc welded gears and copper brazed drive shaft gears for durability
Rigid welded reel construction for added strength
Free-wheeling feature when ratchet disengaged
Load matched gear ratios for easier cranking
All parts zinc plated with TUFFPLATE TM for triple life span of standard zinc plated finishes
Permanently lubricated drive shaft bearings

Model
Part No
Finish
Rated Capacity
Gear Ratio
Hadle Length
 
 
 
(kg)
 
(mm)
DL600
45069
Tuff-Plate
272
3:2:1
178
DL1300
43505
Tuff-Plate
590
4:4:1
178
DL1402
47794
Tuff-Plate
635
4:4:1
241
DL1800
45066
Tuff-Plate
817
5:4:1
241
DL2500
45067
Tuff-Plate
1134
17:3:1
241
DL2500B
45068
Tuff-Plate
1134
17:3:1
241


D-L Brake Winches

Featuring a fully automatic self-locking brake which supplies a constant, positive holding action for additional safety and control in lifting and pulling applications, D-L Brake Winches prevent the possibility of a run-away load. Available in two models - premium B Series and economical DLB Series.

Features
Laminated high carbon steel gears for long life
Embossed, reinforced bases for extra strength
Handle integral part of braking mechanism
B Series additionally features
   -extra heavy construction
   -gear cover enclosing for brake mechanism
   -drive shaft needle bearings

Model
Part No
Finish
Rated Capacity
Gear Ratio
Handle Length
 
 
 
(kg)
 
(mm)
B 1502
45063
Powder Coat Copper
681
6:1
311
B1500
45074
Powder Coat Copper
681
6:1
311
B 2500
45075
Powder Coat Copper
1135
12:1
311
DLB 800
45073
Powder Coat Copper
363
3:2:1
178
DLB 1200
45071
Powder Coat Copper
545
5:4:1
178
DLB 1500
45072
Powder Coat Copper
681
5:4:1
238


D-L StrongArm Electric Winches

Providing load-moving muscle at the push of a button, D-L StrongArm electric winches make quick work of difficult loading and pulling jobs.

Features
Heat-treated sintered-iron gears on electric winch gear-train for smooth, quiet operation
Heat-treated high carbon steel on final drive gears for added strength
Precision needle bearings used in high-load areas for low friction and longer life
Emergency crank handle standard
Stainless steel front plate for superior rust resistance
1-piece high impact case provides excellent weather resistance
Power-In, Power-Out controlled
Freewheeling clutch and automatic brake (except TW 4000)
Circuit-breaker overload protection on high-torque 12V DC Motor
Dynamic motor brake and mechanical friction brake to securely hold the load

Model
Part No
Volts/Amps
Load Capacity
Fitted With
Size
 
 
 
(kg)
 
 
SA 5000 DC
45077
12V DC / 70A
681
Cable
4.76mm 6.1m
SA 7000DC
45078
12V DC / 70A
999
Cable
4.76mm x 6.1m
SA 9000 DC
45079
12V DC / 70A
1362
Cable
5.56mm 6.1m
SA 12000 DC
45076
12V DC / 70A
2043
Cable
5.56mm 6.1m
TW 4000
43579
12V DC / 40A
681
Strap
50mm x 6.1m
TW 9000
43580
12V DC / 70A
1362
Strap
50mm x 7.6m



Industrial Loadbrake Winches

Designed to suit a wide range of industrial lifting purposes for use in either the vertical or horizontal position, PWB Anchor Industrial Loadbrake Winches can be either wall or floor mounted. Standard equipment includes a loadbrake which automatically suspends the load when handle winding ceases. Available in 500kg and 1 tonne capacities.

Capacity
Part No
Drum Dia.
Max Rope Capacity
Handle Turns to Reach 1m
Brake Type
handle Length
Effort to Lift Rated Load
Weight
 
 
(mm)
 
 
 
(mm)
(kg)
(kg)
500kg
43262
102
27.5mm x 8mm W/R
21.5
Automatic
305
16
23
1 tonne
43162
140
40m x 13mm W/R
53
Automatic
235
16
45

 
 

Sheaves & Sheave Blocks

The PWB Anchor range of manually operated Sheaves and Sheave Blocks have been specifically designed for use with manilla and wire rope. With fully interchangeable sheaves to minimise storage problems, and supplied with either drop forged swivel hooks or eyes, this practical and versatile range comes with beckets standard on all single and double blocks. Bronze bushes and safety latches are also standard across the range.

General Sheave Information
Sheave Dia
63
75
100
125
150
200
Rope Dia - Manilla (mm)
10
12
16
20
24
32
Rope Dia - Wire (mm)
5
6
8
10
12
16
Axle Dia (mm)
12.5
12.5
19
22
25
35
Boss Width (mm)
20.5
20.5
25.4
29.5
33.4
46.5

Snatch Blocks
Sheave Dia
63
75
100
125
150
200
Capacity
250kg
250kg
500kg
1.0t
1.0t
2.0t
Eye Hook - Wire (Part No)
45615
45632
45665
45699
45716
45750
Swivel Hook - Wire (Part No)
45623
45640
45673
45707
45724
45758
Swivel Hook - Manilla (Part No)
45622
45639
45672
45706
45723
–

Single Sheave Blocks
Sheave Dia
63
75
100
125
150
200
Capacity
250kg
250kg
500kg
1.0t
1.0t
2.0t
Eye Hook - Wire (Part No)
45616
45633
45666
45700
45717
45751
Swivel Hook - Wire (Part No)
45624
45641
45674
45708
45725
45759
Swivel Hook - Manilla (Part No)
45621
45638
45671
45705
45722
–

Double Sheave Blocks
Sheave Dia
63
75
100
125
150
200
Capacity
250kg
250kg
500kg
1.0t
1.0t
–
Swivel Hook - Wire (Part No)
45620
45637
45670
45704
45721
–
Swivel Hook - Manilla (Part No)
45619
45636
45669
45705
45720
–

Sheaves Only
Sheave Dia
63
75
100
125
150
200
Wire (Part No)
45589
45591
4595
45599
45601
45605
Manilla (Part No)
45588
45590
45594
45598
45600
45604

 
  Ph: (03) 9467 5466   |   Fax: (03) 9467 7834   |   Email: sales@redfernflinn.com.au |   ABN 71 056 616 276